-40%
Curved 12

Curved 12" Radius 42mm Bone Nut for Fender Stratocaster, some Allparts Necks etc

$ 6.79

Availability: 20 in stock
  • All returns accepted: Returns Accepted
  • Type: Nut
  • Color: White
  • Modified Item: No
  • Brand: Unbranded
  • Item must be returned within: 30 Days
  • To Fit: Electric Guitar
  • Custom Bundle: No
  • Condition: New
  • Material: Bone
  • Return shipping will be paid by: Buyer
  • MPN: Does Not Apply
  • Position: Neck
  • Refund will be given as: Money Back
  • Restocking Fee: No
  • Product Type: Nuts

    Description

    Curved 12" Radius 42mm Bone Nut for Fender Stratocaster, some Allparts Necks etc
    New curved bottom pre-slotted bone nut
    String slots are nicely cut, eliminating a lot of unnecessary slot filing
    Compatible with some Fender Deluxe Guitars, some Allparts necks, and other 12" radius necks with
    contoured
    nut slot.
    Dimensions Approx: 42mm long x 3.4mm wide x 5.4/4.9mm High (5.4 low E end, 4.9 high E end)
    For right handed guitars
    Picture is one of the actual nuts being sold, not generic
    Fast Ship USPS First Class Package
    .................................................................................................................
    Please note, pre-shaped nuts are not a drop in replacement. In most cases some sanding will be necessary to fit the width of your guitar slot properly. If you need to lower the overall height, just lay out a piece of sandpaper between 2 frets and move the nut back and forth keeping the nut square to the surface. Depending on on your guitar, some slot filing may be required as well.
    Do I need a flat bottom or curved bottom nut?
    Most, if not all Fender Squire, and other Strat and Tele style guitars made oversees (China, Indonesia, etc.) use flat bottom nuts.
    This nut cannot be used as a replacement for a flat bottom nut.
    In most cases, Fender’s made in the US and Mexico use curved bottom nuts ranging from 7.25” to 12” radius, with 9.5” radius being very popular found on many American and MIM standards.
    Do I need 42mm or 43mm?
    That could depend on your guitar or your preference. Guitar specs usually include nut width (see Fender website for example). Sometimes specs can differ slightly from what is actually on the guitar. The difference between 42mm and 43mm is very slight (42mm is approximately 1.65” or 1 5/8”— 43mm is approximately 1.69” or 1 11/16”). Many Fenders, Squire, and other Fender style guitars spec 42mm nut. Some use 43mm or (42.8). For an exact replacement, it’s best to measure your present nut or go with what is spec’d. Some prefer a 43mm nut regardless, because 43mm sometimes gives slightly wider string spacing, and/or the oppor
    tunity to sand the ends of the nut to precise width of the neck…or not.