EMERSON CUSTOM Pro Cts - 500K Long (3/4 ") Split Shaft Potentiometer

Description

Emerson Custom PRO CTS - 500K Long (3/4") Split Shaft Potentiometer
potentiometer
- Low Torque (Easy turning - for quicker/easier Volume & Tone swells.
- 1/4" split shaft for fine-knurled (24-spline) US Spec knobs.
- Typically used on Carved Top Les Pauls, but can be used on any guitar that requires a 500K Long Split Shaft Potentiometer.
Emerson Pro CTS pots from Emerson Custom were designed to be the premium choice for the discerning guitarist looking for the optimum performance and tonal response from a guitar potentiometer. These specially designed Emerson Pro CTS feature a longer-life brass shaft and bushing. They also feature a tighter ±8% resistance tolerance compared to CTS products offered by most other suppliers. Each and every Emerson Pro CTS pot is hand tested to ensure that they meet or exceed our stated tolerances. We take great pride in offering some of the best, most consistent potentiometers on the market today. Emerson Pro CTS pots have a proprietary custom audio taper that was specially designed by Emerson Custom to give you a very smooth and accurate response when you roll up and down on the controls. These pots will give you a much more responsive taper than what you'll get with economy or even standard issue CTS pots. Crank your guitar up to 10 and the volume swells all the way—no abrupt flattening to choke your playing style. Clarity and Precision define this Series of Premium Potentiometers by Emerson Custom.
Each Emerson Pro CTS pot includes a flat washer, lock washer, and two hex mounting nuts for custom height adjustment on a pickguard, control plate, or directly on to the guitars top from inside the control cavity.
- Shaft Style: (24 Spline) Split Shaft, Fine Knurling
- Shaft Diameter: 0.234” (6.00MM)
- Shaft Height: 3/8” (9.52MM)
- Thread: 3/8” X 32
- Thread Height: 3/4” (19.05MM)
- Required Mounting Hole: 3/8” (9.52MM)
Our Emerson Pro split shaft pots are made to fit USA Spec 24 spline push-on knobs. Import Guitars will need new USA Spec Knobs. We recommend that you slightly crimp together the top of the potentiometers shaft ever so slightly so that when you go to push on the knob you don't damage the pot shaft by exerting too much downward pressure.
+++ 3 year guarantee +++
Applies to all our items
30-day return policy
without additional Reason. Notes, book and software are not possible to exchange. The general terms and conditions of Zoundhouse GmbH & Co.KG apply.
The European Union provides an online platform (“OS platform”) for the out-of-court settlement of consumer disputes
https://ec.europa.eu/consumers/odr
When purchasing multiple items from us: Place the items in the shopping cart and select "Request total from buyer" at the top right.
If you intend to buy multiple articles: Put them into your shopping cart and choose "combined shipping" (up right) on your checkout.
BREXIT information for UK customers:
DHL will take care of all the official paperwork and payment of the VAT on your behalf and they will pass that cost to you on their invoice.
From our limited experience so far, the government charges consist of
20% VAT plus a small amount for the paperwork involved (usually around 2.5%).
Emerson Pro CTS pots from Emerson Custom were designed to be the premium choice for the discerning guitarist looking for the optimum performance and tonal response from a guitar potentiometer. These specially designed Emerson Pro CTS feature a longer-life brass shaft and bushing. They also feature a tighter ±8% resistance tolerance compared to CTS products offered by most other suppliers. Each and every Emerson Pro CTS pot is hand tested to ensure that they meet or exceed our stated tolerances. We take great pride in offering some of the best, most consistent potentiometers on the market today. Emerson Pro CTS pots have a proprietary custom audio taper that was specially designed by Emerson Custom to give you a very smooth and accurate response when you roll up and down on the controls. Th
BREXIT information for UK customers:
DHL will take care of all the official paperwork and payment of the VAT on your behalf and they will pass that cost to you on their invoice.
From our limited experience so far, the government charges consist of 20% VAT plus a small amount for the paperwork involved (usually around 2.5%).