Fuel Water Separator Wrench , Upper & Lower Bearing Carrier Puller for Yamaha

Description

▲
Upper Bearing Carrier Puller--- For Removing upper bearing carrier from Yamaha, Johnson, Evinrude, Suzuki, Honda and Mercury (with carrier style upper bearing housing) Includes MT0013 Collar Adapter to allows the puller to quickly remove drive shaft collars for Yamaha. Adjustable arms fits most Upper Bearing Carriers.
▲
Lower Bearing Carrier Puller--- Puller with Adjustable arms that fits most gearcase allow to remove the toughest lower bearing carrier from lower units on Yamaha, Johnston, Evinrude, Mercury, Honda and Mercruiser
▲
Fuel Filter Water Separator Wrench--- Used to grip and remove and replace the plastic fuel water separator cup without damage from Outboard Motors on Yamaha 4-Strokes 150 to 350 HP (Serial Number 0406 ),F150-F350, 2.6L and 3.3L HPDI 2006 to Current.Applied with 1/2 inch drive.
▲
High Quality Material-- ALL are made of high hardened 4140 impact grade steel,with black or silver oxide coating which is rust-resistance and durable to use.Better than OEM.
▲
Satisfaction Guarantee: If you're not 100% satisfied with this tool set, simply return it for a full refund in 60 days, guarantee with 12 months’ warranty.
Upper Bearing Carrier Puller with Drive Collar Adapter & Lower Bearing Carrier Puller& Fuel Filter Water Separator Wrench
This tool set can help you remove the upper & lower bearing carrier , drive shaft collars and remove and replace the plastic fuel water separator cup without damages from Motors on Yamaha.
SAVING YOUR TIME AND MONEY!!!!!!
MT0013 Collar Adapter
Includes MT0013 Collar Adapter to allows the puller to quickly remove drive shaft collars for Yamaha
The collar can keep the drive shaft from knocking when idling in gear, so be sure to replace it with some upward pressure on the drive shafts you seat it into place.
Upper Bearing Carrier Puller
For Removing upper bearing carrier from Yamaha, Johnson, Evinrude, Suzuki, Honda and Mercury (with carrier style upper bearing housing)
Adjustable arms will fit in a variety of hub diameters.
No more prying against seal surfaces, no damage potential
Includes
1 x Upper Bearing Carrier Puller
1 x MT0013 Drive Shaft Collar Adapter
Made of high hardened 4140 impact grade steel,,with silver oxide coating which is rust-resistance and durable to use.Better than OEM.
We have used this tool and the collar adapter to remove lower bearing carrier housings as well.
How to remove a corroded shaft bearing housing
Normally all you need is a screwdriver to remove the input shaft bearing housing from an outboard. However, if water has found its way into the lower casing, the bearing housing will probably have corroded and you'll need to get a bit more technical than relying on a simple screwdriver. So you need this upper bearing carrier puller!
NOTICE:
At first, please removed the lower casing from the motor and disassembled the water pump. Removing a Corroded Input Shaft Bearing Housing.
Before trying to remove the bearing housing, make sure you've removed the two oil seals and the oil seal cover that sit on the drive shaft above the bearing housing itself..
Method 1
Position the puller's jaws on either side of the bearing housing. Hold the jaws securely against the bearing housing, and swiftly pull the puller's handle upwards so it hammers against the top of the puller shaft. (Note: If the corrosion isn't too bad, you may get lucky and the bearing housing will break free.)
Method 2
Heat the bearing housing with a blow torch, then position the puller over the bearing and try to break it free, as described in Method 1 (Note: Heat causes metal to expand, and this slight expansion may be enough to help you break the bearing housing free.)
Method 3
Place a chisel against one of the bearing housing's bolt holes, and use a hammer to try and rotate the housing and break it free. Then, use the puller tool as described in Method 1. (NOTE: This hammer and chisel method will damage the bearing housing, but if the corrosion is this bad, it will need to be replaced anyway.)
If the bearing carrier is corroded in solid, you can heat it and use this puller to remove it.
Very easy to use and heavy duty for lower carrier bearing removing
Includes
1 x Lower Bearing Carrier Puller
Lower Bearing Carrier Puller
For removing the toughest lower bearing carrier from lower units on Yamaha, Johnston, Evinrude, Mercury(DOES NOT FIT VERADO), Honda and Mercruiser
Legs are designed with swinging arms to fit most gear case 115hp and above
The powerful forcing screw to remove the toughest lower bearing carrier, using with hand ratchet or air impact.
Ball bearing head for zero friction and maximum pulling power.
Made of high hardened 4140 impact grade steel,with black oxide coating which is rust-resistance and durable to use.Better than OEM.
How to remove bearing carrier
1. Remove the lower unit from the outboard and drain the lower casing lube.
2. Remove the propeller from the prop shaft.
3. Remove the two 12mm bolts holding the lower casing cap, followed by the cap itself.
4. Remove the two retaining bolts from the bearing housing.
5. Place a prop shaft housing puller over the bearing housing and remove the housing.
Warm Tip:
If the bearing housing doesn't want to come out, heat the lower casing around it with a blow torch. Heating the casing makes it expand, and will help break the bearing housing free.
Slotted and Teeth design for quick access to filter cup without having to feed sensor wiring through the wrench.
Applied with 1/2 inch drive.
Included:
1 x Fuel Water Separator Wrench
Fuel Filter Water Separator Wrench
Fit for Yamaha 4-Strokes 150 to 350 HP (Serial Number 0406 ),F150-F350, 2.6L and 3.3L HPDI 2006 to Current
Used to grip and remove the plastic fuel water separator cup from Outboard Motors on Yamaha and replace the old fuel filter without damage.
Securely grips filter cup to prevent unnecessary damage to delicate plastic parts during removal.
Replacement Parts: YB-ACC04 , 18-79815
Made of high hardened 4140 impact grade steel,with black oxide coating which is rust-resistance and durable to use.Better than OEM.
Payment
Payment methods accepted: Payoneer
.
Our Payoneer account allows you to pay by credit card, debit card and your paypal balance.
Delivery details
1.Orders will be ship out within 1-2 business days after payment has cleared.
2.Orders from Saturdays, Sundays or holidays will process on next business day and will be ship within 24 hours.
3.All vimin_store items are shipped from the United States and the package will be free of charge for Express Shipping via USPS, UPS. Absolutely Fast and Safe!
Terms of sales
1. If you're not 100% satisfied with our item, simply return it for a full refund in 60 days. We support 12 months’ Warranty.
2. Leave a message note in returned box quoting your item(s) ID and buyer ID.
3. All returned products must be in their original condition and package. Unfortunately, if products have been assembled or modified, we cannot take them as returns.
4. It is important that we know when your return is expected. Please save your return tracking number or post receipt, and email it to us. We need this in case there are any issues during transit.
5. Refund will only be issued upon our receipt of the returned parcel. Please allow 2 working days for us to process with your return.
Contact us
Any question, please let me know. We try our best to reply to your emails as soon as possible.
Please allow 24 hours for us to response. your understanding and patience is much appreciated!
1. Please contact us before leaving Negative feedback or open any disputes on eBay if you are not satisfied our service or products. Good communication is helpful for both of us to resolve any problems and issues.
2. If possible,could you please leave us a positive feedback and 5 star DSR when you receive the item in satisfactory condition. Your kind support will be highly appreciated by us and keep us moving forward.