Nut Guitar Black PTFE Epiphone LP Style 44 mm 1 3/4 RH 109360

Description

Guitar Nut Right Hand 44mm E Style
Black PTFE
Modern Epiphone® Style
.240" Thickness (6.1mm (slightly over 15/64")
.357" Height (11/32" or 9.08m) in middle
1.737" length (1 47/64" or 44mm)
This is a Black PTFE nut, the product is formed with PTFE and plastic material.
It is pre-shaped and pre-sized.
We are not associated with the original manufacturer, these parts originate from our suppliers only.
These are not made by the original OEM suppliers.
This product is packaged in a bulk package.
Right Hand
12" Radius
PTFE Black Nut
Pre-shaped
Pre-slotted
Pre-sized
44mm, 1 3/4" Size
Fits Modern Style Epiphone® and some LP
Specifications:
Right Hand
PTFE Black Nut
.24" width (6.1mm or slightly over 15/64")
.357" height (slightly over 11/32" or 9.08mm) in middle
1st string height is .332" (just over 21/64" (8.4mm)) at top edge of nut
6th string height is .342" (8.69mm (21/64"))
1.737" width (1 47/64" or 44mm)
String spread is 1 3/8" Typical for width of nut
String slots are set for 10-46 gauge cut.
Radius 12"
Depending on your guitar, you may have to sand for height or adjust string slot cut for setup.
Note: This is a flat bottom nut similar to many modern G Style nuts, it is not tapered to fit older designs.
PTFE and Resin (Plastic) molded Material.
Gibson®, Epiphone®, Les Paul®, S.G.®, Flying V®, ES-175®, ES-335® and P-90® are registered trademarks of Gibson Guitar Corporation. The reference is for the purposes of identifying a cross reference for this product, these product are made for us and do not originate from the OEM supplier or source.