Trim Cylinder Caps Pin Wrench -MT0006-32mm x 4mm for Yamaha Johnson Honda Suzuki

Description

Features
Application
Trim Caps on ALL SHOWA manufactured Trim/Tilt Units for Yamaha ,Evinrude.
High Quality Material
Our pin wrench has a 200 ft-lb MIN Pin Strength, Made of high hardened 4140 impact grade steel,with silver oxide coating which is rust-resistance and durable to use. High precision and hardness ensure long-term service.
Function
To rebuild a leaked device on outboard engine, hydraulic trim and tilt unit .Used to remove and install the Trim and Tilt Caps without damaging it and the steering cylinder
A Must Have
Trim/Tilt Pin Wrench AMT0006-32mm x 4.5/4mm Remove Trim/Tilt Caps on Hydraulic Cylinders for Yamaha Suzuki Johnson Evinrude Outboards
Features
Application
Trim Caps on ALL SHOWA manufactured Trim/Tilt Units for Yamaha ,Evinrude.
High Quality Material
Our pin wrench has a 200 ft-lb MIN Pin Strength, Made of high hardened 4140 impact grade steel,with silver oxide coating which is rust-resistance and durable to use. High precision and hardness ensure long-term service.
Function
To rebuild a leaked device on outboard engine, hydraulic trim and tilt unit .Used to remove and install the Trim and Tilt Caps without damaging it and the steering cylinder
A Must Have
Usually, you will put a little drift into one of those holes in the trim and tilt caps with a hammer. Than,you destroy these cap ,you will thrown them away,which cost a about hundred bucks. So, you really need the pin wrench to help you finish that case with ease
Satisfaction Gurantee
If you have any dissatisfaction during use with our products.You can request a full refund within 30 days to support a 12 month warranty.Professional and sincere service allows you to purchase without risk!
Product description
FITMENT
for Trim Caps on ALL SHOWA manufactured Trim/Tilt Units
for Trim Caps Yamaha F115-F150
for Trim caps ALL Yamaha I4 2.8L (F175-F200)
for Trim Caps Yamaha 2-Strokes (115-225hp)
for Trim Caps on ALL Yamaha VMAX
for Trim Caps All Suzuki,Johnson, Evinrude
Equivalent Factory Tool
YB-06175-1A
YB-06548
A Must Have Tool
This professional quality tool is required to remove the nut on the trim and tilt cylinder.
Easily rebuild a leaked device on outboard engine, hydraulic trim and tilt unit. Save money and time.
Built to Last
Made of hardened stainless steel coated with silver finish for extended longevity and durability, great looks and solid construction make this an outstanding upgrade over your OEM # YB-06175-1A!
Features
Direct replace OEM# YB-06175-1A
Replaceable Hardened Stainless Steel Pins with Gripping Teeth for added security
1/2" Socket Drive - 46m-lb Torque Rating.
180 ft-lb MIN Pin Strength
Easy to Use
1. TRIM: Remove and reinstall the trim sub-assemblies, replace the trim cap seals, replace sub-assembly O and backer ring.
2. TILT: Remove and reinstall the tilt sub-assembly, tear down and rebuild of the tilt sub-assembly including removal of the tilt valve body and the cap, remove and reinstall the valve body parts, replace the tilt cap seal, replace the tilt valve body O and backer ring, replace the tilt valve body internal O and backer ring.
Package Included
1 × Marine Pin Wrench（32 mm x 4 mm）
6 × Removable Pins（4mm）
Item Specifics
Brand
MY-Auto
Manufacturer Part Number
MYQP948Silver
Fitment
Yamaha Suzuki Johnson Evinrude Outboards
Material
Steel
Compatibility
Yamaha F115-F150 I4 2.8L (F175-F200) 2-Strokes (115-225hp)
Number of pieces
1
Warranty
1 Year
Unit Quantity
1
Color
Sliver
Type
Outboard Trim/Tilt Pin Wrench
Size
32mm x 4.5/4mm
Model
MT0006
Payment
1.
Payment methods accepted:
Paypal only
.
Our Paypal account allows you to pay by credit card, debit card and your Paypal balance.
2.
All major credit cards are accepted through our secure payment processor Paypal.
3.
Payment must be received
within 7 business days
of auction closing.
4.
We ship items to
Your Paypal address
.Please
make sure your Paypal address is correct
before you pay, cause it cannot be changed once the order ship
1.
Payment methods accepted:
Paypal only
.
Our Paypal account allows you to pay by credit card, debit card and your Paypal balance.
2.
All major credit cards are accepted through our secure payment processor Paypal.
3.
Payment must be received
within 7 business days
of auction closing.
4.
We ship items to
Your Paypal address
.Please
make sure your Paypal address is correct
before you pay, cause it cannot be changed once the order shipped out.
1.
Payment methods accepted:
Payoneer
.
Our Payoneer account allows you to pay by credit card, debit card and your payoneer balance.
2.
All major credit cards are accepted through our secure payment processor Payoneer.
3.
We ship items to
Your Ebay address
.Please
make sure your Ebay address is correct
before you pay, cause it cannot be changed once the order shipped out.
Shiping
1.
Item will be shipped out within 1-2 business day after clear payment received.
2.
Please make sure shipping address on your Ebay account is correct & up-to-date.
3.
All of our items are shipped from our warehouse.
4.
Please feel free to contact us by email if you cannot get your order in time.
Please read the shipment and payment detail carefully before you bid.
Return
1.
Return to us within 60 days from the delivery date for exchange or refund. Refund will be given as Money back or item exchange (buyer's choice).
2.
Return shipping fee is the responsibility of buyer unless the return is a result of our mistake.And all NON-seller mistake returns for refund are subject to 20% re-stocking fee.
3.
If you need return, please contact our customer service representative, let us know the detailed problem and send us some pictures for confirmation.
Contact us
Please contact us via ebay. We will respond within 1 business day or less.Thank you for your understanding.
DESCRIPTION
PAYMENT
SHIPPING
RETURN POLICY
CONTACT US
Excellent Delivery
Shop Category
Store Home
Home Part
Tool
Engine
Boat part
Trim
Jeep
Ford
Volvo+Subaru
Dodge
GM
Oil Filter
Polaris
Honda
Aircondition
Blacksmith
Transmission
Other
Hot Item
74mm 14 Flute Oil Filter Wrench Caps for Mercedes Porsche VW Audi Ford Benz BMW
USD 11.99
86mm Oil Filter Wrench Tool Cartridge Housing Caps For BMW 1/2/3/4/5/6/7 X/M/Z
USD 13.99
Oil Filter Wrench For Toyota, Corolla & Lexus 4 Cylinder Prius Matrix Rav4 Auris
USD 7.80
Front & Rear Wheel Bearing Greaser Service Tool For Can-Am Outlander Commander
USD 13.49
For Toyota Lexus Scion 4 Cylinder Oil Filter Aluminum Cup Wrench Housing Cap M01
USD 7.19
New List Item
For Cummins ISX12 /15 Crankshaft Front Seal Tool & Wear Sleeve Remover/Installer
USD 170.99
For Polaris Water Pump Rebuild Kit Bearing Seal & Gaskets 350L 400&400L 2 Stroke
USD 20.90
Silver Barrel Lock Billet Aluminum Locking Fuel Filler Door for Hummer H2 03-09
USD 179.99
12MM & 15MM Turbocharger Bolt Wrench for Cummins ISB 5.9L & 6.7L # 9866B 9866A
USD 68.99
Heavy Duty Truck Cylinder Liner Puller 3376015 for Cummins Caterpillar PT-6400-C
USD 421.99
Help & Info
Payment Policy
Shipping Policy
Return Policy
FAQ
About Us
Trim/Tilt Pin Wrench AMT0006-32mm x 4.5/4mm Remove Trim/Tilt Caps on Hydraulic Cylinders for Yamaha Suzuki Johnson Evinrude Outboards
Features
Application
Trim Caps on ALL SHOWA manufactured Trim/Tilt Units for Yamaha ,Evinrude.
High Quality Material
Our pin wrench has a 200 ft-lb MIN Pin Strength, Made of high hardened 4140 impact grade steel,with silver oxide coating which is rust-resistance and durable to use. High precision and hardness ensure long-term service.
Function
To rebuild a leaked device on outboard engine, hydraulic trim and tilt unit .Used to remove and install the Trim and Tilt Caps without damaging it and the steering cylinder
A Must Have
Usually, you will put a little drift into one of those holes in the trim and tilt caps with a hammer. Than,you destroy these cap ,you will thrown them away,which cost a about hundred bucks. So, you really need the pin wrench to help you finish that case with ease
Satisfaction Gurantee
If you have any dissatisfaction during use with our products.You can request a full refund within 30 days to support a 12 month warranty.Professional and sincere service allows you to purchase without risk!
Product description
FITMENT
for Trim Caps on ALL SHOWA manufactured Trim/Tilt Units
for Trim Caps Yamaha F115-F150
for Trim caps ALL Yamaha I4 2.8L (F175-F200)
for Trim Caps Yamaha 2-Strokes (115-225hp)
for Trim Caps on ALL Yamaha VMAX
for Trim Caps All Suzuki,Johnson, Evinrude
Equivalent Factory Tool
YB-06175-1A
YB-06548
A Must Have Tool
This professional quality tool is required to remove the nut on the trim and tilt cylinder.
Easily rebuild a leaked device on outboard engine, hydraulic trim and tilt unit. Save money and time.
Built to Last
Made of hardened stainless steel coated with silver finish for extended longevity and durability, great looks and solid construction make this an outstanding upgrade over your OEM # YB-06175-1A!
Features
Direct replace OEM# YB-06175-1A
Replaceable Hardened Stainless Steel Pins with Gripping Teeth for added security
1/2" Socket Drive - 46m-lb Torque Rating.
180 ft-lb MIN Pin Strength
Easy to Use
1. TRIM: Remove and reinstall the trim sub-assemblies, replace the trim cap seals, replace sub-assembly O and backer ring.
2. TILT: Remove and reinstall the tilt sub-assembly, tear down and rebuild of the tilt sub-assembly including removal of the tilt valve body and the cap, remove and reinstall the valve body parts, replace the tilt cap seal, replace the tilt valve body O and backer ring, replace the tilt valve body internal O and backer ring.
Package Included
1 × Marine Pin Wrench（32 mm x 4 mm）
6 × Removable Pins（4mm）
Payment
Shiping
Return
Contact us
1.
Payment methods accepted:
Paypal only
.
Our Paypal account allows you to pay by credit card, debit card and your Paypal balance.
2.
All major credit cards are accepted through our secure payment processor Paypal.
3.
Payment must be received
within 7 business days
of auction closing.
4.
We ship items to
Your Paypal address
.Please
make sure your Paypal address is correct
before you pay, cause it cannot be changed once the order ship
1.
Payment methods accepted:
Paypal only
.
Our Paypal account allows you to pay by credit card, debit card and your Paypal balance.
2.
All major credit cards are accepted through our secure payment processor Paypal.
3.
Payment must be received
within 7 business days
of auction closing.
4.
We ship items to
Your Paypal address
.Please
make sure your Paypal address is correct
before you pay, cause it cannot be changed once the order shipped out.
1.
Payment methods accepted:
Payoneer
.
Our Payoneer account allows you to pay by credit card, debit card and your payoneer balance.
2.
All major credit cards are accepted through our secure payment processor Payoneer.
3.
We ship items to
Your Ebay address
.Please
make sure your Ebay address is correct
before you pay, cause it cannot be changed once the order shipped out.
1.
Item will be shipped out within 1-2 business day after clear payment received.
2.
Please make sure shipping address on your Ebay account is correct & up-to-date.
3.
All of our items are shipped from our warehouse.
4.
Please feel free to contact us by email if you cannot get your order in time.
Please read the shipment and payment detail carefully before you bid.
1.
Return to us within 60 days from the delivery date for exchange or refund. Refund will be given as Money back or item exchange (buyer's choice).
2.
Return shipping fee is the responsibility of buyer unless the return is a result of our mistake.And all NON-seller mistake returns for refund are subject to 20% re-stocking fee.
3.
If you need return, please contact our customer service representative, let us know the detailed problem and send us some pictures for confirmation.
Please contact us via ebay. We will respond within 1 business day or less.Thank you for your understanding.
All rights reserved.