Trim/Tilt Pin Wrench Kit MT0004 MT0006 MT0009 for Yamaha Suzuki Johnson Outboard

Description

Product Feature:
* Fitment: Fit for all Yamaha Suzuki Johnson Evinrude Hydraulic Trim/Tilt Endcaps, also for All Seastar Hydraulic Steering End Caps.
* Replacement: Equivalent Yamaha Factory Toosl: YB-06175-2B, YB-06175-1A, YB-06548.
* Strength: Trim and Tilt hydraulic pin wrench. MT0004 & MT0006 MIN Pin Strength is 180 ft-lb, MT0009 MIN Pin Strength is 200 ft-lb.
* Package: Three of 1/2" socket drive, Pin Wrench with size of MT0004-38mm x 4mm, MT0006-32mm x 4mm/4.5mm and MT0009-35mm x 6mm
* Material: Made of high quality-42CrMo Steel to ensure resistance to corrosion and rust, protection and years of trouble-free use, also show superior durability and impact resistance.
Outboard Trim/Tilt Pin Wrench Set AMT0004 & AMT0006 & AMT0009 Remove Trim/Tilt Caps, Trim Seals on Hydraulic Cylinders for Yamaha, Suzuki, Johnson, Evinrude, Honda Outboards
Product Feature:
* Fitment:
Fit for all Yamaha Suzuki Johnson Evinrude Hydraulic Trim/Tilt Endcaps, also for All Seastar Hydraulic Steering End Caps.
* Replacement:
Equivalent Yamaha Factory Toosl: YB-06175-2B, YB-06175-1A, YB-06548.
* Strength:
Trim and Tilt hydraulic pin wrench. MT0004 & MT0006 MIN Pin Strength is 180 ft-lb, MT0009 MIN Pin Strength is 200 ft-lb.
* Package:
Three of 1/2" socket drive, Pin Wrench with size of MT0004-38mm x 4mm, MT0006-32mm x 4mm/4.5mm and MT0009-35mm x 6mm
* Material:
Made of high quality-42CrMo Steel to ensure resistance to corrosion and rust, protection and years of trouble-free use, also show superior durability and impact resistance.
Product Description:
Three wrench set fits ALL Yamaha, Suzuki, Johnson, Evinrude trim and tilt end caps.
Ultra High Strength stainless steel brings minimum 180 ft-lbs proof strength. Replaceable Pins are available.
*Also works on SeaStar Hydraulic Steering ends caps. If looking at a specific application measure the pin spacing and diameter!
*Operate easily, only makes both pin line up with the hole and insert, then work with 1/2" breaker bar.
Feature:
- 1/2" Socket Drive
- 180 ft-lb MIN Pin Strength
Equivalent Yamaha Factory Toosl:
- AMT0004 - YB-06548
- AMT0006 - YB-06175-1A
- AMT0009 - YB-06175-2B
Package Details:
1Pcs Pin Wrench - MT0004-38mm x 4mm with 6 Pins,
1Pcs Pin Wrench Silver - MT0006-32mm x 4mm with 6 Pins,
1Pcs Pin Wrench - MT0009-35mm x 6mm with 3 Pins.
Item Specifics
Brand
CTY-Auto
Manufacturer Part Number
Does Not Apply
Warranty
1 Year
Model
AMT0004 & AMT0006 & AMT0009
Type
Outboard Trim/Tilt Pin Wrench Set
Color
Black and Silver
Material
Steel
Replacement
YB-06175-2B, YB-06175-1A, YB-06548
Fitment
for Yamaha Suzuki Johnson Evinrude Hydraulic Trim/Tilt Endcaps
Also Fit
Also for All Seastar Hydraulic Steering End Caps
Head Style
Hex, C Shaped
Number of Pieces
3
Payment
We accept Payoneer payment only.
Shipping
Orders will be ship out within 1-2 business days after payment has cleared. Orders from Saturdays, Sundays or holidays will process on next business day and will be ship within 24 hours. Please allow 10-30 days for international deliveries. Some shipments could take longer subject to your local customs authorities.
Returns
1. Return to us
within 30 days
from the delivery date for exchange or refund. Refund will be given as Money back or item exchange (buyer's choice).
2. Return shipping fee is the responsibility of buyer unless the return is a result of our mistake. And all non seller mistake returns for refund are subject to
20% re-stocking fee.
3. If you need return, please
contact
our customer service representative, let us know the detailed problem and send us some pictures for confirmation.
Contact Us
If you have any question, please feel free to contact us 24 Hours a Day, 7 Days a Week, and we will reply you ASAP. If no response within 24 Hours, please check the spam of mail box or kindly re-send it to us.
DESCRIPTION
PAYMENT
SHIPPING
RETURN POLICY
CONTACT US
Shop Category
Store Home
Other
Body Mount Bushing Kit
KF04060BK Body Mount Bushing Kit for Ford F250 F350 Super Duty 2008-2016 2/4WD
USD 128.99
KF04060BK Body Mount Bushing Kit for Ford F250 F350 Super Duty 2008-2016 2/4WD
USD 120.00
Body Mount Bushing Kit for Ford F250 F350 1999-2017 Polyurethane Body Mounts
USD 66.17
Polyurethane Body Mount KF04050BK Bushing Kit for 1999-2017 Ford F250 F350 2/4WD
USD 53.99
7-141 Body Cab Mount Bushing Kit For Chevy Silverado 1999-2014 & Sierra 2WD/4WD
USD 79.99
KF04050BK Body Mount Bushing Kit for Ford F250 F350 1999-2017 2/4WD Polyurethane
USD 70.33
Motor Accessories
Volvo & Mack Flywheel Turning Tool 88800014 for D11 D13 D16 MP7 MP8 MP10 Engines
USD 26.98
AHHON1419 Serpentine Belt Wrench Tensioner Tool for Honda Acura 2004-2007 CR-V
USD 35.99
Transmission Pto Fast Cooler Manual Trans for GM Dodge NV4500 NV5600 ZF Ford
USD 94.13
For Mercruiser Alpha 1 Gen 2 Sterndrives Transom Bellows Kit Lower Shift Cable
USD 126.99
3406 Front & Rear Crankshaft Seal Wear Sleeve Installer For CAT 3406 3408 C-15
USD 349.99
Rear Seal Wear Sleeve Installer Remover Tool 3164780 for Cummins ISX15 ISX12 QSX
USD 175.99
1068 Front+ Rear Braided Brake Lines For ATV Polaris RZR 800/S 800/4 800/XP 900
USD 39.99
Rocker Arm Retainer Clip W302193 For 2003-2010 Ford 6.0L Powerstroke Diesel
USD 31.99
6682 Camshaft Holding Tool Timing Cam Tension Set For Ford 3.5L 3.7L 4V Engine
USD 35.89
Axle Shaft Oil Seal Installer Tool Wheel Knuckle for 2005-2021 Ford F-250/350
USD 73.00
For 1999-2004 Ford Mustang ABS Black Side Window Louvers Scoop Cover Vent 2Pcs
USD 48.99
7040 Diesel Piston Ring Compressor Tool 5.4" Bore For Cummins ISX, CAT 3400 C-15
USD 170.99
Hot Item
AHHON1419 Serpentine Belt Wrench Tensioner Tool for Honda Acura 2004-2007 CR-V
USD 35.99
Front & Rear Wheel Bearing Greaser Service Tool For Can-Am 25-1516 293350040
USD 13.40
Powerstroke Fuel Pressure Test Fitting Adapter For 6.0L Ford Diesel 2003-2010
USD 14.37
For Dodge Cummins Turbo Adjustable Boost Elbow Controller HX35W HX40W HY35W
USD 12.90
Engine Valve Cover Gasket Set for GMC Chevy Silverado 4.8L 5.3L 6.0L 6.2L 7.0L
USD 15.39
Excellent Delivery
Recommend
10Pcs/Set Front& Rear Wheels Fender Flares Cover for Jeep Compass 2011-2018
USD 125.99
7402 Universal Outside Thread Chaser for External Repair Tool 1-1/4” to 5” O.D
USD 51.59
HS5157 Front Mount Hydraulic Steering Cylinder Seal Kit For Seastar Teleflex
USD 35.99
115225FS Seal Kit Outboard Trim/Tilt Cap & Trim/Tilt Pin Wrench MT0006 MT0009
USD 102.00
Diesel Injector Seat & Bore Cleaning Brush Kit 8090S Premium Stainless Steel
USD 98.69
22 Pcs PDR Tools Push Rods Spring Steel Kit Paintless Dent Repair Removal Tool
USD 89.39
Outdoor Generator Waterproof Cover For Honda Generator EU2200i EU2000i EU3000is
USD 17.47
JDG476 JT30040B Crankshaft Rear Main Seal Installer For John Deere 7.6L ST-198
USD 169.99
7040 Piston Ring Compressor Tool + Anti-Polishing Ring For Cummins ISX 15/QSX 15
USD 325.00
New List Item
Duramax Transmission Cooler Lines Hoses For 2006-2010 GM GMC Chevy LBZ LMM 6.6L
USD 115.99
PAC 1219 Drop-In Beehive Valve Springs Set GM LS 4.8 5.3 5.7 6.0 6.2L 0.625 Lift
USD 69.99
J-35686-B Front Rear Crankshaft Seal Wear Sleeve Installer for Detroit Diesel 60
USD 159.88
6684 Valve Spring Compressor Tool Rotunda 303-1039 For Ford 4.6L 5.4L 6.8L 3V
USD 29.50
VE Pump Fuel Pin 40HP 3200 RPM Governor Spring For 1988-1993 Dodge Cummins 5.9L
USD 34.59
Outboard Trim/Tilt Pin Wrench Set AMT0004 & AMT0006 & AMT0009 Remove Trim/Tilt Caps, Trim Seals on Hydraulic Cylinders for Yamaha, Suzuki, Johnson, Evinrude, Honda Outboards
Product Feature:
* Fitment:
Fit for all Yamaha Suzuki Johnson Evinrude Hydraulic Trim/Tilt Endcaps, also for All Seastar Hydraulic Steering End Caps.
* Replacement:
Equivalent Yamaha Factory Toosl: YB-06175-2B, YB-06175-1A, YB-06548.
* Strength:
Trim and Tilt hydraulic pin wrench. MT0004 & MT0006 MIN Pin Strength is 180 ft-lb, MT0009 MIN Pin Strength is 200 ft-lb.
* Package:
Three of 1/2" socket drive, Pin Wrench with size of MT0004-38mm x 4mm, MT0006-32mm x 4mm/4.5mm and MT0009-35mm x 6mm
* Material:
Made of high quality-42CrMo Steel to ensure resistance to corrosion and rust, protection and years of trouble-free use, also show superior durability and impact resistance.
Product Description:
Three wrench set fits ALL Yamaha, Suzuki, Johnson, Evinrude trim and tilt end caps.
Ultra High Strength stainless steel brings minimum 180 ft-lbs proof strength. Replaceable Pins are available.
*Also works on SeaStar Hydraulic Steering ends caps. If looking at a specific application measure the pin spacing and diameter!
*Operate easily, only makes both pin line up with the hole and insert, then work with 1/2" breaker bar.
Feature:
- 1/2" Socket Drive
- 180 ft-lb MIN Pin Strength
Equivalent Yamaha Factory Toosl:
- AMT0004 - YB-06548
- AMT0006 - YB-06175-1A
- AMT0009 - YB-06175-2B
Package Details:
1Pcs Pin Wrench - MT0004-38mm x 4mm with 6 Pins,
1Pcs Pin Wrench Silver - MT0006-32mm x 4mm with 6 Pins,
1Pcs Pin Wrench - MT0009-35mm x 6mm with 3 Pins.
Payment
We accept Payoneer payment only.
Shipping
Orders will be ship out within 1-2 business days after payment has cleared. Orders from Saturdays, Sundays or holidays will process on next business day and will be ship within 24 hours. Please allow 10-30 days for international deliveries. Some shipments could take longer subject to your local customs authorities.
Returns
1. Return to us
within 30 days
from the delivery date for exchange or refund. Refund will be given as Money back or item exchange (buyer's choice).
2. Return shipping fee is the responsibility of buyer unless the return is a result of our mistake. And all non seller mistake returns for refund are subject to
20% re-stocking fee.
3. If you need return, please
contact
our customer service representative, let us know the detailed problem and send us some pictures for confirmation.
Contact Us
If you have any question, please feel free to contact us 24 Hours a Day, 7 Days a Week, and we will reply you ASAP. If no response within 24 Hours, please check the spam of mail box or kindly re-send it to us.
All rights reserved.