Zero Glide Slotted Zero Fret Nut Kit for for Gibson® Les Paul/SG Guitar ZS-1

Description

Zero Glide model ZS-1 slotted zero fret nut system
for Gibson® and similar guitars.
Length: 1-51/64" (45.8mm), Height: 15/32" (12mm), Thickness: 15/64" (5.9mm), String Spacing: 1-7/16" (36.5mm), Radius: fits 8" to 16"
Better tuning, better open string tone
The zero fret low approach angle reduces string contact in the nut by 93%. Strings glide freely on the polished fret, and return to tune fast and reliably. The feel is the same low action as using a capo.
No modification needed
No cutting or changing your guitar. You can switch back to your conventional nut if you ever feel like it.
Fretboard radius is not an issue:
choose the Zero Glide that fits your guitar, and the zero fret flexes to conform to your fretboard.
Simpler than making a nut from scratch
Making a traditional nut is tricky: it means cutting six string slots, each to a perfect depth. The Zero Glide is so much easier: the built-in zero fret sets all the string heights at once, uniformly. The pre-cut string slots are only needed for string spacing.
Swap out your existing nut
Zero Glide is a direct replacement - you get four frets of different heights, to match the frets on your guitar. These are of a special nickel silver alloy that's harder and longer-wearing than conventional frets.The zero fret sits at the exact right point for accurate intonation. Tuning is smoother too, as the strings glide across the polished fret surface.
<